Micron SSD M500 M600 M1100 2.5" inch 256GB 480GB Solid State Drive (SSD)

Micron has released the newest addition to its portfolio of solid state drives, the M600 SATA SSD, designed for low power consumption in client computing environments and the direct successor to the M550. The M600 is built using Micron’s in-house 16nm NAND Flash and features the company’s new dynamic write acceleration, both of which will likely add to its reliability and longevity. Micron has also implemented its industry leading encryption and security features within the M600, including Opal 2.0 self-encryption, RAIN reliability technology, power loss protection and adaptive thermal monitoring.

Series      Model                         Storage
M600     MTFDDAK1T0MBF    1TB
M600     MTFDDAK256MBF    256GB
M600     MTFDDAK512MBF    512GB
M1100    MTFDDAK1T0TBN    1TB
M1100    MTFDDAK512TBN    512GB
M1100    MTFDDAK256TBN    256GB
M500     MTFDDAK480MAV    480GB

Micron M600 Specifications

Form factor: 
2.5-inch
mSATA
M.2
Capacities:
256GB/512GB/1TB,(2.5-inch)
Interface: SATA 6Gb/s
Sequential performance (up to):
Read: 560MB/s
Write: 510MB/s
Random performance (up to):
Read: 100,000IOPS
Write: 88,000IOPS
PCMark Vantage score (up to): 87,000
Active average power consumption (TYP): 150mW
Idle average power consumption: <100mW
Device sleep power consumption: <2mW
Endurance (TBW)
Operating temp: 0°C to +70°C
Dimensions:
2.5-inch: 100.45mm x 69.85mm x 7mm
mSATA: 50.80mm x 29.85mm x 3.75mm
M.2 2280: 80mm x 22mm x 3.58mm
M.2 2260: 60mm x 22mm x 2.3mm
MTTF: 1.5 million hours

Micron M11000 Specifications

• Micron® 3D TLC NAND Flash
• RoHS-compliant package
• SATA 6 Gb/s interface
• TCG/Opal 2.0-compliant self-encrypting drive
(SED)
• Compatible with Microsoft eDrive®
• Hardware-based AES-256 encryption engine
• ATA modes supported
– PIO mode 3, 4
– Multiword DMA mode 0, 1, 2
– Ultra DMA mode 0, 1, 2, 3, 4, 5, 6
• Industry-standard, 512-byte sector size support
• Hot-plug/hot-remove capable (2.5")
• Device sleep (DEVSLP), extreme low-power mode
• Native command queuing support with 32-command slot support
• ATA-8 ACS3 command set compliant
• ATA security feature command set and password
login support
• Secure erase (data page) command set: fast and secure erase
• Sanitize device feature set support
• Self-monitoring, analysis, and reporting technology
(SMART) command set
• Dynamic write acceleration
• Adaptive thermal monitoring
• Power loss protection for data-at-rest
• Performance1, 2
– PCMark® Vantage (HDD test suite score): Up to
84,000
– Sequential 128KB READ: Up to 530 MB/s
– Sequential 128KB WRITE: Up to 500 MB/s
– Random 4KB READ: Up to 55,000 IOPS
– Random 4KB WRITE: Up to 83,000 IOPS
– READ/WRITE latency: 85µs/40µs (TYP)
• Reliability
– MTTF: 1.5 million device hours3
– Static and dynamic wear leveling
– Uncorrectable bit error rate (UBER): <1 sector
per 1015 bits read
• Low power consumption
– Device Sleep numbers: <4mW
– DIPM numbers: 110mW TYP4
• Endurance: Total bytes written (TBW)
– 120TB
• Capacity (unformatted): 128GB
• 2.5-inch × 7mm form factor
• Secure firmware update with digitally signed firmware image
• Operating temperature
– Commercial (0°C to +70°C)5
Notes: 1. Typical I/O performance numbers as measured fresh-out-of-the-box (FOB) using Iometer with a queue depth of 32 and write
cache enabled.
2. 4 KB transfers used for READ/WRITE latency
values.
3. The product achieves a mean time to failure
(MTTF) based on population statistics not
relevant to individual units.
4. Active average power measured during execution of MobileMark® with DIPM (deviceinitiated power management) enabled.
5. Temperature measured by SMART attribute
194