Kingston HyperX Fury 8GB 2400 MHz 288 Desktop Gaming Ram HX424C15FB2/8

Product Details Of Kingston HyperX Fury 8GB 2400 DDR4 2400MHz 288 Pin Dekstop Gaming RAM HX424C15FB2/8

DESCRIPTION

HyperX HX424C15FB2/8 is a 1G x 64-bit (8GB) DDR4-2400 CL15 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-2400 at a low latency timing of 15-15-15 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows: 

SPECIFICATIONS

CL(IDD)

• 15 cycles

Row Cycle Time (tRCmin)

• 46.75ns(min.)

Refresh to Active / Refresh Command Time (tRFCmin)

• 350ns(min.)

Row Active Time (tRASmin)

• 29.125ns(min.)

Maximum Operating Power

• TBD W* 

UL Rating

• 94 V - 0

Operating Temperature

• 0o C to +85o C 

Storage Temperature     

• -55o C to +100o C

FEATURES

• Power Supply: VDD = 1.2V Typical  
• VDDQ = 1.2V Typical 
• VPP - 2.5V Typical
• VDDSPD = 2.2V to 3.6V  
• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals 
• Low-power auto self refresh (LPASR) 
• Data bus inversion (DBI) for data bus 
• On-die VREFDQ generation and calibration 
• Single-rank 
• On-board I2 serial presence-detect (SPD) EEPROM 
• 16 internal banks; 4 groups of 4 banks each 
• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS) 
• Selectable BC4 or BL8 on-the-fly (OTF) 
• Fly-by topology 
• Terminated control command and address bus 
• Height 1.340” (34.04mm), w/o heatsink